The brushed motor kit includes the following:
- 1 brushed motor PCB
- 2 dual channel MOSFETs
- 4 220 ohm resistors
- 4 10k ohm resistors
- 1 10uF tantalum capacitor
- 4 schottky diode
Solder the 4 220 ohm and 4 10k ohm SMD resistors as follows:
R11, R12, R13, R14 – 220 ohm
R15, R16, R17, R18 – 10k ohm
Solder the two dual channel MOSFETs making sure the part numbers are facing inwards as shown on the picture above.
Step 3 (Optional):
Solder the 4 (optional) schottky diodes making sure the anode markings match as shown on the picture above. This step can be skipped.
Solder the 10uF tantalum capacitor making sure the anode marking matches as shown on the picture above.