Store

If you like any of my pcb designs, boards or projects; I am trying to make those available for purchase here.

Note: Please note shipping starts from $4.99 for US and $9.99 for international orders and will change based on the number of items you order.

Please contact me via the Contact page about the items you are interested to purchase and the quantity along with your shipping address; I will then send a Paypal invoice to your email address including shipping cost.

1. Mini OLED Breakout Board I2C – Assembled – $9.99/piece (Assembled)

Specifications:

1. Dimension: 22mm x 9.8mm
2. Interface: I2C
3. Supply voltage: 3.3v
4. Logic Voltage: 3.3v

This board can be used to solder the FPC ribbon of any monochrome OLED display (0.96″ or 1.3″) that uses the SSD1306 driver chip. The board exposes the I2C interface which requires only two pins to drive the OLED display from any microcontroller. More information on this is here. This board is very small and be folded on the back of the OLED display to save more space in space constrained designs.

2. Mini OLED Breakout Board I2C – Assembled with 0.96″ White OLED - $19.99/piece (Assembled)

 

Specifications:

1. Dimension: 22mm x 9.8mm
2. Interface: I2C
3. Supply voltage: 3.3v
4. Logic Voltage: 3.3v
5. OLED Display Size: 0.96″
6. OLED Display Color: Mono – White
7. OLED Display Resolution: 128×64

This a completely assembed I2C OLED board and 0.96″ white OLED display. It can be connected to any 3.3v microcontroller and controlled over the I2C interface. More information on this is here. This board is very small and be folded on the back of the OLED display to save more space in space constrained designs.

3. Micro Brushed Motor Driver Board V1 – $9.99/piece (Kit) – ($19.99/piece (Assembled)

Front                                      Back

Specifications:
1. Dimension; 12mm x 12.5mm
2. Weight: 0.9 g
3. Continuous Drain Current: 2.7A
4. Max Voltage: 3.7v~5.0v
5. Works with both 3.3v and 5.0v microcontrollers
6. Flyback voltage protection

This board is specially designed and tested to drive small brushed motors used in small/tiny/nano quadcopters or other multi-rotor model aircrafts. The board can drive 4 brushed motors via PWM signals using a 3.7V LiPo battery pack.

PayPal Acceptance Mark

6 thoughts on “Store

  1. Belizario Montanez

    I am interest in your nano FC and diver boards, if you could please ccontact me, it would be greatly appreciated.

    Thank you
    Belizario Montanez

  2. Bill McAvoy

    Hi Pial,

    I am interested in your Micro Brushed Motor Driver Board, but I don’t quite understand kit vs finished. If it means soldering then I am definitely on the finished side.

    Please let me know and also let me know an estimate to ship two boards to Canada.

    Thanks, Bill

  3. Manuel Perez Jimenez

    I am imterested about two Micro Brushed Motor Driver Board V1
    I need to know about kit vs assembled and how much would shipping this to Spain be?

    Thanks

  4. Peter

    Hello,

    I m interessting to buy 1. 1. Mini OLED Breakout Board I2C – Assembled – $9.99/piece (Assembled)
    Could you tell me too if it’s poissible to use it for other oled display (96×16 OLED 0.63″, or 128×32 OLED 091″).

    Thank you

Leave a Reply

Your email address will not be published. Required fields are marked *


nine − = 1

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>